High frequency accelerometer with integral cable, 100 mV/g
Model 712F
High frequency accelerometer, 100 mV/g, side exit 16' Teflon-jacketed integral cable, 8-32 mounting thread, case isolated
High frequency accelerometers are used on machinery with gear mesh or small bearings, such as high-speed machine tool spindles and compressors. At high frequencies, there is little vibration in terms of displacement and velocity, however tremendous amounts of acceleration amplitudes may be present.
Features
- Corrosion resistant
- Hermetic seal
- Ground isolated
- Reverse wiring protection
- ESD protection
Downloads
Specifications
| PARAMETER |
VALUE |
| Sensor output |
Dynamic vibration (IEPE) |
| Sensitivity |
100 mV/g |
| Sensitivity tolerance |
±10 % |
| Frequency response, ±3dB |
3 Hz - 25,000 Hz |
| Mounting Thread |
8-32 captive screw with 0.047" diameter safety wire hole |
| Connector style |
Integral cable |
| Connector orientation |
Side exit |
| Full-scale range |
60 g peak |
| Resonance frequency |
45 kHz |
| Temperature range |
-50°C to +120°C |
| Weight |
35 grams |
| Hazardous area approvals |
Non-approved |
EN
ENGLISH
