Intrinsically Safe certified accelerometer and temperature sensor; general purpose accelerometer, sensitivity 100 mV/g; temperature sensor, sensitivity 10 mV/C; low profile with side exit, 3-pin MIL-C-5015-style connector; case isolated
Dual-output sensors measure both vibration and temperature, providing more data from one sensor to simplify your condition monitoring setup. Dual-output sensors are useful in applications where users want to know the temperature at the mounting locations.
Temperature is measured by an integrated circuit chip that produces a DC output voltage signal. The signal changes by 10 millivolts per degree Celsius. A one degree Celsius change infers a 10 mV voltage difference where the reference temperature 0º Celsius. As an example, at a temperature of 110ºC the DC temperature signal would be 1.10 Volts DC.
|Sensor output||Dynamic vibration + temperature (3-wire sensor)|
|Sensitivity tolerance||±5 %|
|Frequency response (±3 dB)||0.5 - 10,000 Hz|
|Mounting Thread||1/4-28 UNF tapped hole|
|Connector style||MIL-C-5015, 3-pin|
|Connector orientation||Side exit|
|Full-scale range||80 g peak|
|Resonance frequency||22 kHz|
|Temperature range||-50°C to +120°C|
|Hazardous area approvals||Class I, Div 1 Groups A, B, C, D; Class I Zone 0 / Zone 1|
You can find out more about which cookies we are using or switch them off by changing your browser settings.