Phone: +1-301-330-88111-800-WILCOXON

Side exit dual-output accelerometer and temperature sensor, 100 mV/g

Model 787T

Accelerometer and temperature sensor, general purpose accelerometer sensitivity 100 mV/g, temperature sensitivity 10 mV/C, side exit 3-pin MIL-C-5015-style connector, case isolated

Dual-output accelerometer and temperature sensors measure both vibration and temperature, providing more data from one sensor to simplifying your condition monitoring setup. Dual-output sensors are useful in applications such as paper machines, where users want to know the temperature at the mounting locations in the dryer section.

Temperature is measured by an integrated circuit chip that produces a DC output voltage signal. The signal changes by 10 millivolts per degree Celsius. A one degree Celsius change infers a 10 mV voltage difference where the reference temperature 0º Celsius. As an example, at a temperature of 110ºC the DC temperature signal would be 1.10 Volts DC.

Circular seal with yellow star in the middle with the words Lifetime Warranty

Accelerometer and temperature sensor features

  • Measures both acceleration and temperature
  • More data from a single sensor
  • Rugged design, corrosion resistant
  • Hermetic seal

Included accessories

  • 1/4-28 captive screw



Sensor output Dynamic vibration (IEPE)
Accelerometer sensitivity 100 mV/g
Sensitivity tolerance ±5 %
Temperature sensor sensitivity 10 mV/C
Frequency response, ±3dB 0.5 Hz - 12,000 Hz
Mounting Thread 1/4-28 captive screw
Connector style MIL-C-5015, 3-pin
Connector orientation Side exit
Full-scale range 80 g peak
Resonance frequency 22 kHz
Temperature range -50°C to +120°C
Weight 145 grams
Hazardous area approvals Non-approved

We are using cookies to give you the best experience on our website. Our Privacy Policy has been updated.
You can find out more about which cookies we are using or switch them off by changing your browser settings.

Accept All