Phone: +1-301-330-88111-800-WILCOXON

Premium dual-output accelerometer and temperature sensor, 100 mV/g

Model 793T-3

Accelerometer and temperature sensor, general purpose accelerometer sensitivity 100 mV/g, temperature sensitivity 10 mV/K, top exit 3-pin MIL-C-5015-style connector, case isolated

Dual-output accelerometer and temperature sensors measure both vibration and temperature, providing more data from one sensor to simplifying your condition monitoring setup. Dual-output sensors are useful in applications such as paper machines, where users want to know the temperature at the mounting locations in the dryer section.

Temperature is measured by an integrated circuit chip that produces a DC output voltage signal. The signal changes by 10 millivolts per degree Kelvin. A one degree Kelvin change is the same as a one degree Celsius change; the only difference between them is in the reference temperature, where 0º Celsius is 273º Kelvin. As an example, at a temperature of 300ºK (27ºC) the DC temperature signal would be 3.00 Volts DC.

Accelerometer and temperature sensor features

  • Senses both acceleration and temperature
  • Rugged design
  • Hermetic seal
  • ESD, overload and reverse wiring protection

Included accessories

  • SF6 mounting stud

Downloads

Specifications

PARAMETER VALUE
Sensor output Dynamic vibration + temperature (3-wire sensor)
Sensitivity 100 mV/g
Sensitivity tolerance ±5 %
Frequency response, ±3 dB 0.5 Hz - 15,000 Hz
Mounting thread 1/4-28 UNF tapped hole
Connector style MIL-C-5015, 3-pin
Connector orientation Top exit
Full-scale range 80 g peak
Resonance frequency 24 kHz
Temperature range -50°C to +120°C
Weight 115 grams
Hazardous area approvals Non-approved

We are using cookies to give you the best experience on our website. Our Privacy Policy has been updated.
You can find out more about which cookies we are using or switch them off by changing your browser settings.

Accept All