Intrinsically Safe dual-output accelerometer and temperature sensor, low frequency, 500 mV/g
Model 786T-500-IS
Intrinsically Safe certified accelerometer and temperature sensor; low frequency accelerometer, sensitivity 500 mV/g; temperature sensor, sensitivity 10 mV/C; top exit, 3-pin MIL-C-5015-style connector; case isolated
Dual-output sensors measure both vibration and temperature, providing more data from one sensor to simplify your condition monitoring setup. Dual-output sensors are useful in applications where users want to know the temperature at the mounting locations.
Temperature is measured by an integrated circuit chip that produces a DC output voltage signal. The signal changes by 10 millivolts per degree Celsius. A one degree Celsius change infers a 10 mV voltage difference where the reference temperature 0º Celsius. As an example, at a temperature of 110ºC the DC temperature signal would be 1.10 Volts DC.
Accelerometer and temperature sensor features
- Senses both acceleration and temperature
- Certified for use in Class I Division 1 and Zone 0 / Zone 1 hazardous areas
- Clear signals at low vibration levels
- Ideal for slow-speed machinery
- Rugged design
- Hermetic seal
- ESD protection
Downloads
Specifications
| PARAMETER |
VALUE |
| Sensor output |
Dynamic vibration + temperature (3-wire sensor) |
| Sensitivity |
500 mV/g |
| Sensitivity tolerance |
±5 % |
| Frequency response (±3 dB) |
0.2 - 14,000 Hz |
| Mounting Thread |
1/4-28 UNF tapped hole |
| Connector style |
MIL-C-5015, 3-pin |
| Connector orientation |
Top exit |
| Full-scale range |
10 g peak |
| Resonance frequency |
30 kHz |
| Temperature range |
-50°C to +120°C |
| Weight |
90 grams |
| Hazardous area approvals |
Class I, Div 1 Groups A, B, C, D; Class I Zone 0 / Zone 1 |
We are using cookies to give you the best experience on our website. Our Privacy Policy has been updated.
You can find out more about which cookies we are using or switch them off by changing your browser settings.
Accept All
EN
ENGLISH
