Phone: +1-301-330-88111-800-WILCOXON

786F and 786F-IM comparison
786F-IM-J9T2A and 787F-IM

Affordable integral cable accelerometers

Model: 786-F-IM, 787F-IM, PCC420A-F-IM, PCC420V-F-IM

New injection molded integral cable sensors are more economical with no loss of quality or reliability.

General purpose vibration sensors:
786F-IM-J9T2A, top exit
787F-IM-J9T2A, low profile side exit

4-20 mA vibration transmitter sensors:
PCC420A-F-IM-J9T2A, acceleration output
PCC420V-F-IM-J9T2A, velocity output

Key features and benefits

  • Injection molded integral cable with simplified design and fewer points of potential failure
  • Rugged cable-connector interface for more substantial protection in harsh plant environments
  • Hermetically sealed 316L stainless steel sensor
  • Shielded, twisted pair J9T2A integral cable with Teflon jacket, rated to 200°C
  • Exact same accelerometer! Lower price with zero loss of performance
786A-F-IM787F-IMPCC420A-F-IMPCC420V-F-IM
Sensitivity, tolerance100 mV/g, ±5%100 mV/g, ±5%
Acceleration range80 g80 g
Frequency range, ±3 dB 0.5 - 13,000 Hz0.5 - 10,000 Hz1.0 Hz - 2.0 kHz3.5 Hz - 2.0 kHz
Full scale, 20 mA, ±5% (selectable)5 g, 10 g, 20 g, or 50 g0.5 ips, 1.0 ips, 2.0 ips, 3.0 ips, 5.0 ips, 10 mm/sec, 20 mm/sec, 25 mm/sec, or 50 mm/sec
4-20 mA output typeRMS or peakRMS or peak
Max temp, sensor120°C120°C105°C105°C
Max temp, J9T2A cable200°C200°C200°C200°C
Height including connector3.42” (87 mm)1.19” (30 mm)3.77” (96 mm)3.77” (96 mm)

General purpose applications:

  • Pumps and submersible pumps
  • Other wet applications, like washdown and spray down areas
  • Vibration monitoring on marine vessels

Industries:

  • Water & Wastewater
  • Food & Beverage
  • Pharmaceuticals
  • Pulp & Paper forming section and other difficult-to-reach areas up to 125°C

We are using cookies to give you the best experience on our website. Our Privacy Policy has been updated.
You can find out more about which cookies we are using or switch them off by changing your browser settings.

Accept All