The ultrasound receiver - available in four convenient kits - detects and converts ultrasonic (>20 kHz) noise produced by mechanical, pneumatic, hydraulic, and electrical systems down to an audible range to hear. Changes in the amplitude and characteristics of the ultrasound are comfortably detected in noisy plant environments. Leaks are easily pinpointed. Electrical issues are safely exposed. Equipment problems such as bearing monitoring are diagnosed even earlier than other technologies such as infrared inspection and oil analysis, enabling ultrasound to complement traditional vibration monitoring methods and enhance condition based maintenance programs.
Complements vibration monitoring of bearings and gearboxes
Add the UDK-CM ultrasound detection kit to your condition monitoring routine to evaluate bearing over- and under-lubrication and other conditions that lead to bearing wear. In some cases, like slow-speed bearing monitoring, ultrasound detection can pinpoint troubles even before traditional vibration monitoring.
Finds all turbulent flow leaks
The UDK-LK kit includes everything needed for compressed air/gas, vacuum, and valve leak detection. Unlike traditional “leak detectors,” which detect a characteristic of a specific gas, the receiver detects the turbulent airflow of any compressed gas.
Identifies electrical defects from a safe distance
The UDK-EI kit detects corona discharge, tracking, and arcing from a safe distance, up to 150 feet, with no need to remove panels. A parabolic range extender makes it possible to inspect electrical lines from up to 300 feet away.
Detects leaks in valves and steam traps
The UDK-VL kit detects internal by-pass leaks in valves and steam traps to optimize efficiency.
Hear, monitor and diagnose bearings, gears, pumps, valves, and cylinders. A cloud-based application analyzes, trends, and reports the condition of critical production equipment. See UDK-CM kit details.
Detect leaks of any type of gas from vacuums, valves, steam traps, and HVAC systems. See UDK-LK kit details.
Detect corona discharge, tracking, and arcing from a safe distance, with no need to remove panels or approach power lines. See UDK-EI kit details.
Save money by detecting internal by-pass leaks with a single point inspection. See UDK-VL kit details.
Convenient application-specific kits for condition monitoring, leak detection, electrical safety inspection, and valve and steam trap monitoring are available. Components can also be ordered individually.
You can find out more about which cookies we are using or switch them off by changing your browser settings.